EV-TEST 100 EV Charging Station Test Adapter Rental

The expansion of electric vehicle charging infrastructure has increased the need for electrical safety testing and functional validation of EVSE (Electrical Vehicle Supply Equipment) stations. During installation, maintenance, certification or troubleshooting, it is essential to correctly verify the control signals, protection conditions and electrical behavior of the charging system.

Rental of the EV-TEST 100 adapter enables technical testing of Mode 2 and Mode 3 charging stations by simulating the presence of an electric vehicle and different operating states of the system. This streamlines commissioning, inspection, regulatory compliance validation and preventive maintenance without needing an actual vehicle on hand during testing.

Adapter for EVSE Station Testing

The EV-TEST 100 is a specialized adapter for direct connection to charging stations with Type 2 connectors per IEC 62196-2. The device lets you verify output signals and Control Pilot (CP) communication states, simulate available current through Proximity Pilot (PP), and generate fault conditions for functional and safety testing.

It is designed for maintenance technicians, electrical integrators, validation laboratories and installation contractors who need to evaluate the electrical and logical behavior of EV charging stations.

Main Features of the EV-TEST 100

• For use with Mode 2 and Mode 3 charging stations

• Test cable with Type 2 connector (IEC 62196-2)

• Vehicle simulation through CP states

• Current capacity simulation through PP states

• Control Pilot fault condition simulation

• PE fault condition verification

• Check of the station’s internal energy meter

• LED indicators for phase presence

• Dedicated terminals for connecting measuring instruments

• Fuse protection in the LOAD section

• Supports testing per IEC/EN61851-1 and IEC/EN60364-7-722

What Tests Can Be Performed?

The adapter enables typical functional and electrical checks during:

• EVSE station commissioning

• Preventive and corrective maintenance

• Charging fault troubleshooting

• Control Pilot signal validation

• Phase sequence verification

• Electrical protection checks

• EVSE communication state evaluation

• Standards compliance testing

• Electric mobility infrastructure integration

Technical Specifications

Industrial Applications

• Installation of electric vehicle chargers

• Validation of commercial charging stations

• Electromobility infrastructure

• Electrical testing laboratories

• EVSE system integrators

• Maintenance of public and private stations

• Certification of electrical installations

• Development and validation of EV charging solutions

Benefits of Rental

Lower Capital Investment

Lets you perform specialized tests without permanently purchasing the equipment.

Standards-Based Technical Validation

Supports testing aligned with the international standards applicable to EV charging infrastructure.

Fast Diagnosis of EVSE Stations

Simulating CP and PP states speeds up the detection of functional and electrical faults.

Greater Safety During Testing

The device incorporates protections and dedicated terminals for electrical instrumentation.

Operational Flexibility

Ideal for temporary projects, commissioning, technical audits and specialized maintenance.

Reference Standards

Tests performed with the EV-TEST 100 adapter can be carried out in accordance with:

• IEC/EN60364-7-722

• IEC/EN61010-1

• IEC/EN61851-1

EVSE Test Equipment Rental Service

We rent adapters for verifying electric vehicle charging stations for:

• Commissioning

• Maintenance

• Troubleshooting

• Installation validation

• Technical audits

• Electrical compliance testing

Contact us for availability, rental periods and compatibility with your EVSE charging systems.